These nickel alloy balls, reinforced by precipitation, have excellent mechanical properties as well as remarkable resistance to corrosion and oxidation at high temperatures. They are distinguished by their ideal passive state for demanding applications. With over 40 years of experience, Marteau-Lemarie guarantees a fast supply from our stock in France.
Chemical composition of the inconel® 600 alloy ball
| Element | type | C | If | Mn | S | Cr | Neither | Cu | Fe |
|---|---|---|---|---|---|---|---|---|---|
| % | N06600 | 0,150 max | max. 0.50 | 1.00 max | 0.015 max | 14,00-17,00 | 72,00 min | max. 0.50 | 6,00-10,00 |
Physical characteristics of the inconel® 600 alloy ball
| Ownership | Value | Unit |
|---|---|---|
| Density | 8.44 | g/cm3 |
| Young Module | 210 | GPA |
| Thermal expansion coefficient | 11.9 (DT=0-100°C) | × 10−6 /°C |
| Thermal conductivity | 14.9 | W/m·K |
| Electrical resistivity | 1015 | × 10 - 9 D·m |
| Specific heat | 437 | J/kg·K |
| Relative magnetic permeability | 1,010 | — |
| Magnetic behaviour | Paramagnetic | — |
Hardness and mechanical resistance of inconel® 600 alloy ball
| Ownership | Value | Unit |
|---|---|---|
| Hardness | 28-33 | HRC |
| Tensile failure load | 725-1035 | MPa |
| Tensile failure load | 105-150 | psix10^3 |
| Exercise temperatures | -196/1000 | ° C |
| Exercise temperatures | -320,8/1832 | °F |
Available diameters and grades for inconel® 600 alloy ball
| Parameter | Value |
|---|---|
| Minimum diameter | 1 mm — 3/64′′′ |
| Maximum diameter | 100 mm — 4′′ |
| Grades available | G50-100-200-500 |
| Precision standards | ISO 3290 / AFBMA |
Corrosion resistance of inconel® 600 alloy ball
Bills used in corrosive environments too harsh for stainless steels. Excellent resistance to sulphuric acids, including hot, oxidizing acids and sea water. Almost optimal resistance, including high temperatures, to chloride gases. Can undergo selective oxidation if it is subjected alternatively to oxidizing and reducing atmospheres.
International Standards of Inconel® 600 Alloy Ball
| ITA | USA (AISI) | DIN (GER) | AFNOR (FRA) | UK | GOST (RUS) | GB (CHN) | JIS (JPN) |
|---|---|---|---|---|---|---|---|
| – | N06600 | 2.4816 | NC15FE | NA14 | – | – | – |
Applications of Inconel® 600 alloy ball
Special pumps and valves, automotive components, heat exchangers, turbines. Employees in the food, aerospace, chemical, marine, nuclear and oil industries.
